Mitsubishi Mitsubishi Outlander 2012-2022 Brake System Bolt Torque Specifications
Detailed brake bolt torque specifications for the 2012-2022 Mitsubishi Outlander, including front and rear brake caliper bolts, brake rotor bolts, and more.
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Torque Wrench (3/8" Drive)
Torque Wrench (1/2" Drive)
Angle Gauge
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Torque Calculator
Convert between different torque units
Brake caliper and mounting
Components that secure the brake caliper to the rotor or brake disc, and attach the caliper mounting bracket to the steering knuckle or suspension component.
1 Brake Caliper Bolts
M12 x 1.5
Brake Caliper Bolts
M12 x 1.5Torque Value
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Brake Caliper Mounting Bracket Bolts
M14 x 1.5Torque Value
Brake disc/drum and hub
Components that hold the brake disc or drum in place on the hub or wheel bearing.
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
Brake Disc/Drum Retaining Bolts
M10 x 1.25Torque Value
Brake master cylinder and booster
Components that secure the brake master cylinder to the brake booster or firewall, and attach the brake booster to the firewall or brake master cylinder.
1 Brake Master Cylinder Mounting Bolts
M8 x 1.25
Brake Master Cylinder Mounting Bolts
M8 x 1.25Important Notes
2 Brake Booster Mounting Bolts
M10 x 1.25
Brake Booster Mounting Bolts
M10 x 1.25Important Notes
Abs module and wheel speed sensor
Components that secure the ABS module to the brake master cylinder or brake booster, and attach the wheel speed sensor to the steering knuckle or suspension component.
1 ABS Module Mounting Bolts
M6 x 1.0
ABS Module Mounting Bolts
M6 x 1.0Important Notes
2 Wheel Speed Sensor Mounting Bolts
M5 x 0.8
Wheel Speed Sensor Mounting Bolts
M5 x 0.8Important Notes
Brake line fittings
Components that connect the brake lines to the brake calipers, master cylinder, or ABS module.
1 Brake Line Fittings
M10 x 1.25
Brake Line Fittings
M10 x 1.25Important Notes
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the recommended torque specification for the brake caliper bolts on my 2012-2022 Mitsubishi Outlander?
What is the recommended torque specification for the brake caliper bolts on my 2012-2022 Mitsubishi Outlander?
The recommended torque specification for the brake caliper bolts on your 2012-2022 Mitsubishi Outlander is 30-40 ft-lbs (40-54 Nm) for the front calipers and 20-30 ft-lbs (27-40 Nm) for the rear calipers. It's essential to consult your owner's manual or a repair manual for specific torque values, as they may vary depending on the trim level and model year.
Q2 How often should I check the brake fluid level and top it off if necessary?
How often should I check the brake fluid level and top it off if necessary?
It's recommended to check the brake fluid level every 6,000 to 12,000 miles (9,656 to 19,312 km) or as specified in your owner's manual. If the level is low, top it off with the recommended brake fluid type (DOT 4 or 5.1 for the 2012-2022 Mitsubishi Outlander). Low brake fluid levels can lead to reduced braking performance and increased risk of brake failure.
Q3 Can I use a torque wrench with a socket extension to tighten the brake caliper bolts?
Can I use a torque wrench with a socket extension to tighten the brake caliper bolts?
Yes, you can use a torque wrench with a socket extension to tighten the brake caliper bolts, but make sure the extension is securely attached to the torque wrench and the socket is properly seated on the bolt head. Also, ensure the torque wrench is calibrated and accurate to avoid over- or under-tightening the bolts.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Torque Wrench
A precision tool for applying specific torque values to bolts and nuts.
- Digital display
- Adjustable torque range
Socket Set
A set of sockets for various bolt sizes, including those used in the brake system.
- Chrome vanadium steel construction
- Metric and SAE sizes
Breaker Bar
A long, flexible bar for applying extra leverage to stubborn bolts.
- High-strength steel construction
- Comfort grip handle
Service Procedures
Brake Rotor Removal and Installation
A step-by-step guide to removing and installing the brake rotors on a 2012-2022 Mitsubishi Outlander.
- Raise the vehicle and remove the wheel
- Remove the caliper and rotor
- Inspect and clean the hub and bearing
- Install the new rotor and caliper
- Tighten the caliper bolts to the specified torque value
Brake Caliper Bolt Torque Specification
A guide to the correct torque values for the brake caliper bolts on a 2012-2022 Mitsubishi Outlander.
- Locate the brake caliper bolts
- Apply the specified torque value using a torque wrench
- Verify the torque value using a torque wrench
Technical Service Bulletins
Brake Caliper Bolt Torque Value Update
2015-02-15An update to the brake caliper bolt torque value for 2012-2015 Mitsubishi Outlander models.
Resolution: Update the brake caliper bolt torque value to 30 ft-lbs (40 Nm) for all 2012-2015 Mitsubishi Outlander models.
Brake Rotor Warpage Issue
2018-08-20A technical bulletin addressing a brake rotor warpage issue on 2016-2018 Mitsubishi Outlander models.
Resolution: Inspect the brake rotors for warpage and replace as necessary. Update the brake rotor installation procedure to include a torque specification for the rotor bolts.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.